Yellow - green PVC Wall Panels With Fireworks Design Interlock
Simple to Fit
Surface Finish: Yellow-green fireworks
Surface Treatment: normal printing
Size: 250mm; 7.5mm
Packing: normally be 10pcs per PE film
PVC panel is a alternative product which attains the beauty and
elegance of modern architectural design and at the same time being
cost effective, eco-friendly. It comes in different colors that provide a very modern, clean and
appealing appearance. Due to the nature of PVC it is very durable
and easy to keep clean and is relatively unaffected by:
- Insect Infestation
Overview Benefits of PVC Wall Panels:
- Corrosion Resistant
- No Painting is Required
- Easy to Clean
- Fire Retardant with a classification according to Class B1
- Light Weight
- Termite proof
- Water Proof
- Maintenance Free
Detailed Benefits of PVC Wall Panels:
|PVC panels do not expand, contract or warp when they come into contact with
water, so they will be a good wall and ceiling choice for bathroom.|
|PVC panels can be taken to any plastic recycling facility.|
During the process of installing pvc panels, we can save a lot of
labor cost, because pvc panel is easy to install, we can fit them by ourselves to avoid installation costs. The prices of pvc
panels are very economical even when compared to the other
alternatives available in the market and apart from this deliver
many other advantages.
Its closed, smooth surface means that it is extremely easy to clean
using gentle household detergent dissolved in water. This also
means that the product is virtually dirt resistance because there
are no pores, which can be filled with dirt.
5. Simple and quick to fit
PVC panel is a very easy product to install. Can be stapled,
nailed, screwed or glued. The sides fit exactly into each other to
create an unbelievable flush joint. Also available are strips and
corners with slots to hold the panels perfectly.
PVC Panel Installation
1. Clean the surface of ceiling.
2. Nail wooden or steel battens(20mm - 30mm thick) into the wall
and ceiling, with all the corners firstly, then on the plane with
the distance of 400mm away between every wooden batten.
3. Screw PVC profiles(cornices) on all the corners, then insert the
panel into the corner profiles, then the folling panel into the
4. Screw PVC second panel's notch side into the wooden or steel
battens, then insert the third panel, then the fourth, and nail the
fourth's notch side, then fifth and sixth, then...
5. Attention for the distance and notch side panel: for the ways
above is based on 250mm or 300mm wide panels, and wooden or steel
battens between distance is 400mm, so every 2 panel, screw the
second notch. Surely you could change the ways as per your
situation presently, by way of changing the distance of the panels
and the wooden or stell battens.